Flange type Electromagnetic Flow Meter
Flange type Electromagnetic Flow Meter
Model
CSLD - 3000
Application
● water treatment
● food industry
● pharmaceutical
● petrochemical
● paper mill
● chemical monitoring
Specification
● No moving parts
● No pressure loss
● Less maintenance
● Bi-directional flow measurement
● Built-in self-diagnosis function
● Support data record / bluetooth function
● Various kinds of output signals
Standard design
Size | DN 3 - DN3000mm |
Pressure | 0 - 42Mpa |
Accuracy | 士0.5% |
Material of Liner | PTFE, Neoprene, Hard Rubber, EPDM, FEP, Polyurethane, PFA |
Electrode | SUS316L, Hastelloy B, Hastelloy C, Titanium, Tantalum, Platinum-iridium |
Structure Type | Integral type |
Medium Temperature | -20 ~ +60℃ Integral type |
Ambient Temperature | -25 ~ +60℃ |
Ambient Humidity | 5~100%RH(relative humidity) |
Measuring Range | Max 15m/s |
Conductivity | > 5 us/cm |
Protection Class | IP65 |
Process Connection | Flange |
Output Signal | 4 - 20 mA/Pulse |
Communication | RS485 |
Power Supply | AC220V (can be used for AC85 - 250V) |
| Power Consumption | < 20 W |
| Alarm | Upper Limit Alam Lower Limit Alarm |
| Self - diagnosis | Empty Pipe alarm Exciting Alarm |
| Explosion Proof | ATEX |
ELectrode Material selection
Material:
SS316L
Applicable to industrial/municipal water, wastewater and low corrosive mediums.Widely used in petroleum,
chemical industries.
Hastelloy B
Strong resistance to hydrochloric acids below the boiling point. Resist against oxidable acids, alkali and non-oxidable salts. For instance, vitriol, phosphate, hydrofluoric acids, and organic acids.
Hastelloy C
Exceptional resistance to strong solutions of oxidizing salts and acids. For example, Fe+++, Cu++, Nitric
acids, mixed acids
Titanium
Titanium can withstand corrosive mediums such as seawater, chloride salt solutions, hypochlorite salts,
oxidable acids(including fuming nitric acids), organic acids, and alkali.
Not resistant to high purity reducing acids such as sulphuric acids, hydrochloric acids.
Tantalum
Highly resistant to corrosive mediums.
Applicable to all chemical mediums except Hydrofluoric Acids, Oleum and Alkali
Platinum-iridium
Applicable to all chemical mediums except for Ammonium salts and Fortis
Installation Requirement
In order to obtain a stable and accurate flow measurement, it is very important that the flow meter is installed correctly in the pipe system.
Do not install the meter near equipment that produces electrical interference such as electric motors, transformers, variable frequency, power cables etc.
Avoid locations with pipe vibrations for example pumps.
Do not install the meter close to pipeline valves, fittings or impediments which can cause flow disturbances.
Place the meter where there is enough access for installation and maintenance tasks.
